返回列表 回復 發帖

請問八字天機可否裝在Windows10嗎???

請問八字天機可否裝在Windows10嗎???
抱歉,暫時未能!
我試過,如Windows 7 裝有天機,upgrade 去Windiws 10,可以用到天機冇問題。
因為剛剛購置左新電腦已經是windows 10,是否要等更新版?幾時會更新?
天機系列軟件祇可以裝在windows 7, windows 8,windows 10暫時未能運作。
4# hkcloud

建議不妨將天機直接試裝在Windows 10 上,看是否可運行,因為我由Windows 7 upgrade 至 Windows 10,原已裝上的天機,可在Windows 10 上一切運作正常...

據聞今次微軟在推出Windows 10 前做了很多測試,希望盡量使Windows 10 與Windows 7 & 8 的軟件相容。因此,如試了可行,麻煩順便上來告訴大家一聲。
昨晚已經嘗試過直接安裝,在Windows10上不能安裝天機
7# hkcloud

I see。 謝謝回饋!
7# hkcloud

多口一問,你的Windows 10 是中文還是英文 OS?
是中文os
10# hkcloud

明白。謝謝!
本帖最後由 ATS431 於 8-26-2015 12:43 編輯

It is the same old USB key driver problem again and it can be solved with a bit of manual effort.

I just completed installation of both 八字天機 and 紫微天機 on a new English (US) 64 bits Windows 10 Lenovo Yoga 3 Pro laptop.

Here are the steps:
1) Download USB key driver from Rockey4.com.
http://www.rockey.com.my/wordpress/software-protection/rockey-4
Look for the download tab in the middle of the page and download the Drivers for Windows 64 bit. (That would be the R4USB_2013.ZIP file from 2013)
2) Make sure your USB key is not plugged in. Find your download and unzip it. Go to the 64 bit sub-folder and run the InstDrv64_2013_8_14 installation app to install the USB driver. (Please uncheck the parallel port driver as you won't need it.)
3) Now plug the USB key in and you should see the driver installed automatically in a few seconds. (your universal PnP in action) You can verify it in Settings>Devices>Connected devices and Rockey4-USB should be fine without the error message anymore.
4) Remove the USB key and proceed with 八字天機 2.4.7 and 紫微天機 1.3.1 installation and re-registration as usual.

Hope this info is helpful.
Cheers,
--Joe

p.s. BTW, upgrading from Win8.1 with a working 八字天機 should work fine automatically  because the rockey4 USB driver would have been installed already.
It is the same old USB key driver problem again and it can be solved with a bit of manual effort.

I just completed installation of both 八字天機 and 紫微天機 on a new English (US) 64 bits Windows 10  ...
ATS431 發表於 2015-8-26 10:20
師兄:
    您的辦法試了,八字天機還是不行!
    把電腦重新裝回Win8.1,還是不能安裝八字天機!
    顯示錯誤代碼1702.
    但是,擇日天機和奇門天機都可以正常安裝!
WeChat ID:ChengGangDS
本帖最後由 老成 於 10-12-2015 17:23 編輯

各位師兄:
      終於恢復使用八字天機了!
     Win10系統各種方法都試過了!包括以下網站更新:
    http://www.rockey.com.my/wordpress/software-protection/rockey-4
    接著把系統重新安裝為Win8.1,結果還是不行。發現聚賢館網站有Win8更新:
    http://forum.juxian.com.hk/viewthread.php?tid=8816&extra=page%3D1
    http://www.babelland.com.hk/Products/8LS2PC/Updates.aspx
    下載“八字天機2.4.7(PC:2013.06.24)”版本后重新安裝。
    終於可以使用了!
    升級Win10的各位,一定要小心哦!
WeChat ID:ChengGangDS
跟上以上做法也是裝不了,何時才會更新win10
For whatever it's worth, I just successfully installed both 八字天機 and 紫微天機 again into two more win10 laptops. Here are the specifics:
Two laptops: ThinkPad x301 and ThinkPad X1 Carbon both running 64bits US Windows 10.
Installed R4USB 64 bits 2013_8_14 driver and verified working with Win10 first.
Then installed 八字天機 2.4.7 and 紫微天機 1.3.1, put in registration code and running without any problem. I now have all 3 laptops upgraded to win 10 and running 八字天機 and 紫微天機.
YMMV,
--Joe
問題已解決,終於可在win10運行八字天機,多謝各位師兄師姊的意見。
最後是用了老成兄的方法,在以下網站下載更新版再次安裝便成功http://www.babelland.com.hk/Products/8LS2PC/Updates.aspx
返回列表